Advertisement
2. Slide the old lamp out of the lamp housing.
3. Insert the new lamp into the lamp housing.
CAUTION!
Do not touch the lamp with bare hands. Use a clean cloth.
4. Assemble the Zn lamp with the text "Max Output Port" on the glass
facing the optical unit.
5. Secure the end plate with the two screws.
Connecting the UV lamp
1. Assemble the UV monitor unit on the instrument.
2. Connect the UV lamp power cable to the instrument.
Handling waste
This symbol indicates that the waste of electrical and electronic
equipment must not be disposed as unsorted municipal waste and must
be collected separately. Please contact an authorized representative of
the manufacturer for information concerning the decommissioning of your
equipment.
"Max Output Port"
p. 3
Advertisement
