Webasto Ford Transit Manual page 24

London
20.Connect the blower harness and NEO
adapter harness to the NEO controller. Install
the dome light bezel on the package tray.
NOTE: Refer to the diagram earlier in this
manual for more information
21.Connect the following connectors to the
NEO controller adapter harness:
• coolant pump
• coolant valve
• compressor
Secure unused connectors to the wire harness
as necessary using electrical tape.
AAAAAA
Connect the extreme relay board harness to
the thermostat and NEO adapter harnesses
(27).
AAAAAA
24
Ford Transit