Advertisement
■ Parts
PRINTER OUTPUT
CONNECTOR
DISPLAY PANEL
POWER SWITCH
DISPLAY UNIT
RESET BUTTON
ZERO ADJUSTING KNOB
DETECTOR UNIT
RESET BUTTON
SOCKET
● Printer output connector
The meter performs recording of data, structuring them into statistics, compute processing and
also can be connected to personal computers, thus can be developed to high quality information
processing system. This system is called SPC (Statistical Process Control).
● Unit converter switch
lbf
in ←→ kgf
cm ←→ N
•
•
● Mode switch
PEAK
Holds load value (clear with reset button).
TRACK
Display changes according to load (cleared by removing load).
FIRST PEAK Measures first peak and gives an audible signal when first peak is reached (Requires
a differential of at least 5.0 kgf.cm).
● Socket
This socket is for attaching the device to be measured.
● Buzz set
The buzz set function informs users of arrival at a desired torque with a buzz.
BUZZ SET
m
•
- 3 -
ANALOG OUTPUT CONNECTOR
CONNECT FOR CHARGER
UNIT CONVERTER SWITCH
MODE SWITCH
DETECTOR CORD
(No.: DPC-0506)
Advertisement
