Table of Contents
Advertisement
Do's & Don'ts
Install the Warmup Heated Towel Rails in line with these
instructions� The towel rail is designed to warm towels only
and not provide primary heating�
Ensure that the control card at the back of the manual is
completed and fixed at the consumer unit along with any
plans and electrical test records as per the current edition of
BS 7671�
Install the towel rail at least 600 mm above the floor in order
to avoid a hazard for very young children�
Ensure that all electrical connections conform to the current
BS 7671 Wiring Regulations� Final connections to the main
electricity supply MUST be completed by a Part P qualified
electrician�
Ensure that the power supply to the towel rail is isolated
before any installation or maintenance�
Attempt a DIY repair if you damage the heated towel rail,
contact Warmup for assistance�
Pull on the power supply cable as it may cause damage to the
towel rail�
Attempt cleaning the towel rails using abrasive or chemical
cleaners as these will damage the surface finish over time, use
a soft clean cloth and a non abrasive cleaning agent�
WARNING:
This appliance can be used by children aged from 8
years and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved�
Children shall not play with the appliance� Cleaning and user
maintenance shall not be made by children without supervision�
DO
DON'T
5
Advertisement
Table of Contents
