Table of Contents
Advertisement
Step 4 -
Make Electrical Connection
The Warmup Heated Towel Rails electrical connection
must conform to the current BS 7671 Wiring Regulations.
Final connections to the main electricity supply MUST be
completed by a Part P qualified electrician.
1
•
The supply should be
on a circuit protected by
a maximum 5 amp fuse
or circuit breaker. It is
recommended that the
heated towel rails supply is
fitted with an in-line isolator
to allow it to be independently
isolated. Please see Page 6 for
correct zoning.
Warmup Heated Towel Rails can be connected into the rooms
lighting circuit, enabling the towel rail when the lights are
switched on.
30 mA
N
RCD or
L
RCBO
Alternatively they can be controlled by an independent
controller that provides power on demand.
N
RCD or
L
14
30 mA
RCBO
Max. 5A
Fused Isolator
Switch
Max. 5A
Fused Isolator
Switch
L N E
N
N
L
L
Controller
L N E
Advertisement
Table of Contents
