Components Required For Installation - Warmup HTR-4ROPO Installation Manual

Components Required
for Installation
Components available from Warmup
Ladder Rails
Single Bar Rails
Additional components needed as part of your Warmup heating
installation:
30 mA Residual Current Device (RCD), required as part of all
installations.
Digital Multi-meter required for testing the resistance of the
heated towel rails.
Measuring tape.
Electrical housing, back boxes and junction boxes.
Hammer.
Masking tape.
Spirit level.
4
Warmup Heated Towel Rail
and Components
• HTR-4ROPO • HTR-4SQPO
• HTR-6ROPO • HTR-6SQPO
• HTR-8ROPO • HTR-8SQPO
Warmup Heated Towel Rail
and Components
• HTR-1ROPO • HTR-1SQPO
• HTR-1ROBR • HTR-1SQBR
• HTR-1ROBL • HTR-1SQBL