Warmup HTR Installation Instructions

Hard Wire Kit Installation Instructions
Please read these instructions carefully. Warmup PLC cannot be held responsible if the
Installation and use of the towel rail is not carried out in accordance with the
instructions given below or for materials not supplied by Warmup PLC.

Safety

The towel rail is not intended for use by young children or infirm persons without supervision. Young
children should be supervised to ensure that they do not play with the appliance. The towel rail has
been designed to withstand the loads expected during normal operation as a towel rail. The towel rail
is not a ladder and should not be used as such.

Electrical connections

The towel rail must be wired by a registered electrician. An isolating switch must be positioned near
the towel rail. If the supply cord is damaged the entire towel rail must be returned to Warmup PLC.

Wall mounting

The towel rail is designed to be fixed through wall cladding into solid wall framing, solid cement, or
masonry walls. Plasterboard toggles, of at least 3mm diameter, may be used for 2 of the towel rail
fixings.

Fittings checklist

Fittings
Tel:
Description Qu
Diamond Drill Bit
(Ceramic & Porcelain tiles
Wall Anchor Sleeve
Wall Anchor
Warmup PLC – 702 Tudor Estate, Abbey Road, London NW10 7UW - UK
8453 Fax:
only)
Cover Cap
8453 Website: www.warmup.
antity
1
1
1
1