Table of Contents
Advertisement
Weighing Operation
Before reading detailed instructions on how to use all the weighing
functions that are built into your scale, please read the following
important guidelines:
Always be sure that the display shows `Zero` before use, if it
does not then please press the ZERO key.
The device is designed to detect when a stable weight is
achieved, the indicator will `bleep` twice to indicate a stable weight
value, your reading should be taken at this point.
Warranty-Liability
If a fault or defect is present on receipt of the unit which is
within Faaborg Rehab's scope of responsibility, Faaborg Rehab
shall have the right to either repair the fault or supply a replacement
unit. Replaced parts shall be the property of Faaborg Rehab.
Should the fault repairs or replacement delivery not be successful,
the statutory provisions shall be valid. The period of warranty shall
be two years, beginning on the date of purchase. Please retain your
receipt as proof of purchase. Should your scale require servicing,
please contact your dealer or Faaborg Rehab's Customer Service.
No responsibility shall be accepted for damage caused
through any of the following reasons: Unsuitable or improper
storage or use, incorrect installation or commissioning by the owner
or third parties, natural wear, changes or modifications, incorrect or
negligent handling, overuse, chemical, electrochemical or electrical
interference or humidity, unless this is attributable to negligence on
the part of Faaborg Rehab.
If operating, climatic or any other influences lead to a major
change in conditions or material quality, the treaty for perfect unit
- - 4
Advertisement
Table of Contents
