Table of Contents
Advertisement
Use 0~9 keys to set the increase
in weight limit and press ENTER.
Now the lower display will start
blinking and point to (-) weight
limit. (**),
press 0~9 keys to
set the decrease in weight limit,
the minus (-) sign will appear in
front of the weight decrease
value, after setting the values
press ENTER. (**), the scale will
return to '0.0' reading.
Press
key to turn on the
alarm, the blinking arrow pointing
to
sign means the Alarm
volume is maximum. To decrease
the volume level, press
key again the blinking arrow will
stop blinking, and to turn off the
alarm press the
key once
the pointing arrow will disappear.
*NOTE- As the 'Weight Tracking Function' is activated the original
Patient Weight (patient weight in Step-4) will lock and saved in memory.
And this function can be activated only after moving the bed on the bed
scale and placing the patient on the bed.
**NOTE- The weight change range starts from 500gm/- 500gm and
then can be increased/ decreased by every 100gm.
- 23 -
Advertisement
Table of Contents
