Faaborg Rehab Technic Charder MS 6000 User Manual page 39


Incorrect position or other external objects within weighing
area

The weighing-scale is not put in a solid & firm ground area, such
as carpet floor or lawn.
3. Connection failure for data transmission to PC or printer
 Wrong connection wires or faulty wires for transmission between
the digital indicator & load cells.
 Wrong indicator models
 Wrong internal wiring or wire broken
In case of the following defective mode occurs, it is suggested to contact
your nearest Authorized Dealer for further technician service & repair:
1. POWER switch-on failure :

Push-button faulty

Short circuit wires - Wire broken

Safety fuse burnt out

Wire connection problem

Main power adaptor faulty – Parts Replacement
2. LCD display faulty
 Possible hardware defects include: Uneven brightness in the LCD
display screen & texts color blurred, smeared rainbow screen,
incorrect decimal display
 LCD PIN broken or short circuit
 PCB cooper foil broken & loosed welding
 Unable to save or read data – IC or transistor faulty, internal parts
broken.
 LCD showing "ERRL" after switch on - Load cell damaged
 Overload may cause the weigh to malfunction.
 Software system crash
 Resonator faulty
 Load cells with faulty grinding standard.
 Key buttons failure - Front key panel damaged or disconnected
3. Buzzer malfunction
 Wrong welding of PVC wire
 Key buttons & control panel damaged or disconnected.
- 38 -