Kärcher BR 47 ESC Manual page 14

Maintenance Works
Clean the fluff filter
 Unscrew the tin cover plate using a
torx spanner.
Note:
You will find a torx spanner in the hold-
er of the drainage hose of the dirt water
reservoir.
 Clean the fluff filter.
 Replace the tin plate.
14
Replacing the roller brushes and the
intake brushes
 Loosen all the four screws and re-
move the bearing lid.
1
 Remove the roller brushes (large)
and intake brushes (small) and re-
place them (pay attention to the
hexagonal intake of the brushes!).
Also check simultaneously the
combs and the guide rails and re-
place or clean them as required.
2
Replacing the combs
 Remove the combs and replace
them. To do this, slide the inlet
combs on the narrow rails and the
outlet combs on the wider rails.
– 12
EN