Ejecting The Ait Data Cartridge - NEC N8151-34B User Manual

Ejecting the AIT data cartridge

1
Confirm that the TAPE MOTION LED is not blinking.
2
Pressing the EJECT button, Built-In
AIT starts rewinding the tape (this
may take a few minutes).
When the tape is completely
rewound, the data cartridge is
automatically ejected from the Built-
In AIT.
Important
Depending on your backup software or operating system lock, you may not be able to eject the data
cartridge in the drive by pressing the EJECT button. Eject the data cartridge from the backup
software or wait some time and retry the EJECT button. If you are still unable to eject the data
cartridge, press and hold the EJECT button for 5 or 10 seconds to forcefully eject the data cartridge.
3
Open the dust cover.
Built-in AIT 97