Replace The Battery; Placement And Surroundings; Clean - Bang & Olufsen BeoCom 6000 User Manual

Replace the battery

> Remove the battery cover; press the cover lightly and slide it off.
> Remove the battery and pull out the battery plug.
> Insert the battery plug (A) and place the battery and the cords as
shown.
> Replace the battery cover. Make sure that the tabs and the slots snap
into place correctly at the top and bottom of the cover.

Placement and surroundings

The phone must not be placed in damp, dusty or polluted
surroundings and should not be exposed to direct sunlight or
liquids. Avoid the handset charging contacts touching metal or
greasy parts.
Clean BeoCom 6000
Clean your BeoCom 6000 with a soft, damp cloth with a few drops
of mild detergent added. To clean the charging contacts of
charger and handset – and only these parts – use a cotton swab
and isopropyl alcohol. Do not use isopropyl alcohol to clean any
other part of the charger or handset!
A
If the battery in the handset is
replaced with a new battery,
please follow the instructions
accompanying the new battery.
Use only original batteries from
your Bang & Olufsen retailer!
7