First-Time Registration To Base - Bang & Olufsen BeoCom 6000 User Manual

8
Indicator light
The BeoLine base.
*If you use a BeoCom 6000 base,
a BeoLine PSTN base or a BeoLine
ISDN base, you can only register six
handsets.
>> Get started
First-time registration of the handset to a base
For the base and the handset to be able to communicate, the
handset must be registered to a base. Up to eight handsets can be
registered to the same base*. You can not register a handset to
more than one base.
> Disconnect the base from the mains for at least two seconds and then
reconnect it. The indicator light flashes, and the base is open for
registration for five minutes.
When your base is open for registration, follow the procedure on the
following page.