System Use With Several Handsets - Bang & Olufsen BeoCom 6000 User Manual

System use with several handsets

43
With several handsets registered to one base, you can make your
own phone system. The handsets can all receive external calls, also
during internal calls between handsets. Handsets in the system are
numbered 1–8* and can be named as well.
Each handset is initially set up as 'common'. This means that the
Phonebook, Caller ID list and Redial list are all updated by the base
and shared with other handsets in the system. If you want an
independent Phonebook, Caller ID list and Redial list in an
individual handset, make the handset 'personal' instead.
For further information about the possibilities a system setup offers,
please refer to the following pages.
*If you use a BeoCom 6000 base, a BeoLine PSTN base or a BeoLine ISDN
base, you can only register six handsets.