Set The Time And Date - Bang & Olufsen BeoCom 6000 User Manual

Set the time and date

After you have registered the first handset and named it, the
display prompts you to set the time and date. The time is shown
when the phone is not in use and when there is no new
information in the display. Time and date are also shown with
Caller ID and Redial information.
Set clock? is shown
Press OK to be able to set the clock, or press C if
you wish to skip this step
Turn the wheel to set the year
Press to store and move to the month setting
Set the month, day, hour and minute by turning
the wheel and pressing OK
When you have set the time and date, the
handset prompts you to register more handsets*.
Press OK If you have more handsets to register.
The base is automatically opened for registration.
If you do not have more handsets, press C and
registration is complete.
*You can register additional
the handset with the BeoLine base.
Set clock?
OK
Set year
2005
OK
OK
Register more
handsets?
OK
Base is open
for registration
handsets in this way only if you use
11