Attach The Clip - Bang & Olufsen BeoCom 6000 User Manual

16
2
1
C L I C B
K
C L I C
K
>> Get started

Attach the clip

With the clip you can attach the handset to your pocket. Attach
the clip on the back of the handset:
To attach the clip ...
> Slide the two flaps down along the two grooves on the sides of the
handset.
> When the clip is positioned correctly, approximately 4.5 cm from the
top of the handset, it will click into place. Make sure the clip is firmly
attached on both sides of the handset.
To remove the clip ...
> Pull the left flap (B) out to the left with a flat object.
> When the left flap is clear of the groove, pull the clip back – be careful
not to scratch the handset with the clip.
BeoCom 6000 can only be used
with the Bang & Olufsen
accessories shown: Extra handset,
EarSet 1 Home, Clip, Table charger,
Wall charger.