Bang & Olufsen BeoCom 6000 User Manual page 9

Press to switch on the handset. Register handset
to base? is shown in the display
Press OK. The handset searches for an open base
When a base is located, the PARK number* for
the base is shown. Check the number against
the number on the base
If the numbers do not match, turn the wheel to
view the available bases. If your base is not
shown, open the base for registration once more
and repeat the procedure
If the numbers match, press to register the
handset to the base
If the base prompts you for a pincode, enter the
pincode and press OK. The display tells you
when registration is complete. You can now
name the handset, as described on page 10
*Depending on which base you have, the PARK
number can be found on a label behind the
socket cover, on the socket cover, or on the
bottom of the base.
OK
Register
handset to base?
OK
Base 01/ 02
36 - 000077123456
Base 02 / 02
36 - 000077234567
OK
0 – 9
OK
9