Wall Mounting (Only Bt6002 And 6006); Dip Switches Setting - Bodet BT6002 Installation And User Manual

II - Wall mounting (only BT6002 and 6006)
For each 24 second display, the mounting kit is supplied with (915871) :
- 2 mounting brackets
- TH M10x30 screws
- HU M10 nuts
- Ø10 flat washers
- Ø10 lock washers
1/ Mount the 2 brackets to the wall while respecting the drilling measurement (use the provided
template) (M10 screws and nuts are not suplied by BODET).
2/ Mount the 2 brackets to the display with TH M10x30 screws, HU M10 bolts and Ø10 washers
(see A).
III - DIP switches setting
DIP switches have been set in factory; please check that they are set as follows.
1/ Open all the access hatches. To open the access doors, unscrew the
quarter-turn screws.
2/ DIP switches n°1 to 4 define the part of scoreboard.
3/ DIP switches n°5 to 8 define the scoreboard number.
EACH SCOREBOARD MUST HAVE A DIFFERENT NUMBER.
BT 6006
BT 6008
18
Ø10 flat washers
Ø10 lock washer
TH M10x30 screw
HU M10 nut
mounting bracket
BT 6002
Wall mounting
360 mm
mounting brackets
Scoreboard N°
1
2
3
4
5
6
Quarter-turn screw
Dip 5 Dip 6 Dip 7
off ↓ on ↑ on ↑
on ↑ off ↓ on ↑
off ↓ off ↓ on ↑
on ↑ on ↑ off ↓
off ↓ on ↑ off ↓
on ↑ off ↓ off ↓