Support Leg Fixation (Bt6008) - Bodet BT6002 Installation And User Manual

XI - Support Leg fixation (BT6008)
After installing the BT6008 scoreboard on its mast, a support leg should be installed to bring more
stability to the assembly.
1/ Fix the support leg on the BT6008's mast with the fixation clamp.
Make sure that the adjustment between the support leg and the BT6008's mast is correct.
2/ Fix the shoe (or the mounting bracket*) with the fixation clamp
using 4 threaded shafts, flat washers and nuts on the arm of the
basketball goal (A). Do not fully tighten the shoe to be able to
move it along the arm of the basketball goal.
3/ Position the support leg inside the shoe with HM10×90 screw, HU M10 nut and Ø10 flat washer.
4/ Fully tighten the shoe on the arm of the basketball goal.
Support leg
Mounting Shoe
bracket
or
Fixation
clamp
Threaded shafts
(x4)
*the mounting bracket is directly fixed on the basketball goal using 2 self-drilling screws (not supplied).
BT6008's mast
Fixation clamp
Ø10 Flat washer
M10 Nut
or
A
HM10x90 Screw
A
Ø10 Flat washer
HU M10 nut
Threaded shaft M10 l.185
Ø10 Flat washer
HU M10 Nut
M10x60 Screw
Ø10 Flat washer
M10 Nut
M10x90 Screw
M10 Nut (x4)
(x4)
Ø10 Flat washer
Ø10 Flat washer (x4)
M10 Nut (x4)
25