Mounting On Existing Bodet Wall Bracket (Ref: 916 427) - Bodet 8000 Installation Manual

5.2 - Mounting on existing BODET wall bracket (ref: 916 427)

If a 8000 range scoreboard is to be installed in place of a scoreboard of an older range, it is possible to adapt the
installation without having to get rid of everything of the old installation.
1) Remove the entire existing scoreboard and its fasteners.
IMPORTANT: leave only the wall bracket in place:
2) Install the tube interface BT6000- 8000 on top of the 8000 scoreboard using 2 screws M10x30 an A.
3) Put 2 screws M10 in B without tightening then all the way.
4) Use the eye bolt C to lift the scoreboard to existing BT6000 wall bracket. See steps 2 to 7 in pages 5 and 6 for
this operation.
5) Engage the B screws through the keyhole slots of the wall bracket and slide the scoreboard to the left.
6) Tighten the B screws and install the safety screw D.
6