Table of Contents
Advertisement
Pentair Pool Products
Programming Timed Circuits
You can set timers to automatically run equipment like pool filtration or lights. You can set the
time the equipment turns on and off as well as the days of the week.
This section shows you how to set the timer for the pool filtration system but the process is
the same for any equipment listed.
Getting There
MENU PROGRAM
Go to the Program Pool Timer screen.
1. To set the start time, find the top
Hours label. Press the left button to
change the hour. Press the right
button to change the minutes.
2. To set the stop time, find the bottom
Hours label. Press the left button to
change the hour. Press the right
button to change the minutes.
3. If you want the timer to work only on
certain days, find the Days label. Press
either button next to the label. You
see a screen with the days of the week
listed. The LEDs next to each day name
are lit.
• To turn off a day, press the button next to the day name you don't want. The light
4. When the day names you want are lit, press Save.
5. When you are done, press the Save button.
6. Press the Exit button to return to the Main screen.
Other Available Equipment
Other equipment can be installed or set up, such as setting up Swimming Colors
Feature Circuits
and much more.
For more information about setting up these features, refer to the Set up and Programming
Manual.
Rev. B 3-19-04
POOL
(or any other equipment)
turns off. To set all days to on, leave all the LEDs lit.
TM
, macros to combine circuits, setting a remote control that works by phone,
13
Quick Start Guide
TM
, setting
P/N 520366
Advertisement
Table of Contents
