Table of Contents
Advertisement
Pentair Pool Products
To assign other logic to a circuit
1. Go to the Circuit Functions screen and select a circuit to assign special logic.
Note: You must set pressure cleaners to Master Cleaner circuit function.
2. Press the Prev or Next buttons to make your selections. The options are:
Generic
Master cleaner
Light
Dimmer
SAM Light
SAL Light
Photon Generator
Color Wheel
Valve
Spillway
Floor Cleaner
3. When you are done, press Save.
4. Press the Exit button to return to the Main screen.
Rev. B 3-19-04
No special Logic. Simple On/Off control of a circuit with all the
programmable capabilities.
Works with automatic pool cleaner pumps or cleaner valve actuator. It
does the following:
- Forces the filter pump on 5 minutes before the cleaner.
- Turns the cleaner off when the spa is on.
- Turns the cleaner off for 5 minutes when the solar heating begins.
Allows special lighting features to work, such as ALL lights on or ALL
lights off.
Allows light dimming features to work. Dimming relay must be
installed.
Activates special color lighting programs on other screens on the
Indoor Control Panel when used with SAM pool lights. For example,
you can have ALL lights on or ALL lights off, or use Color Swim, Color
Set, or Color Synch.
Activates special color lighting programs on other screens on the
Indoor Control Panel when used with SAL spa lights. For example, you
can have ALL lights on or ALL lights off, or use Color Swim, Color Set,
or Color Synch.
Lets Pentair Fiberworks fiber optic bulb be operated by Color Set or
Color Swim programs when used with SAM and SAL lighting.
Activates special color lighting programs on other screens on the
Indoor Control Panel when used with Pentair Fiberworks. For
example, you can have ALL lights on or ALL lights off, or use Color
Swim, Color Synch, or Color Set.
Not currently used.
For pool/spa combinations where the spa is raised above the pool.
This setting moves the return valve so that the filter pump pulls the
water from the pool and returns it to the spa, creating a water fall
effect. Automatic pool cleaners are turned off when this feature is
turned on.
This setting moves a 3-way valve every 20 minutes alternating flow
between 2 cleaner system valves that feed the pop-up heads.
9
Quick Start Guide
P/N 520366
Advertisement
Table of Contents
