Table of Contents
Advertisement
Quick Start Guide
Configuring Spa-side Controls
You can configure any spa-side
control to specify which button on the
control activates which function.
Depending on which spa-side control
is installed, you see a slightly different
screen. All screens configure the same,
regardless of how many buttons the
control has.
Getting There
MENU SETUP ADVANCED REMOTES
Go to the Spa Side Control Configuration
screen and select the spa-side control you
have.
1. On the Remote specific screen, press
the button next to the circuit you
want to change. You see a small arrow
pointing to the name of that circuit.
2. Use the Up and Down buttons at the
bottom of the screen to walk through
the alphabetical list of assigned circuit
names.
3. When you find the circuit you want,
press the button next to another spa-
side control button circuit you want to
change. The small arrow moves to that
label. You are done setting the first
spa-side control button circuit and are
ready to set the next.
4. Continue the process to assign other
circuits to the spa-side control
buttons.
5. When you are done assigning circuits
to the buttons on the spa-side control,
press the Save button.
6. Press the Exit button to return to the
Main screen.
P/N 520366
IS10'S IS10 #1
12
iS4 shown above
iS10 shown above
Pentair Pool Products
Rev. B 3-19-04
Advertisement
Table of Contents
