Pentair PENTEK INTELLIDRIVE Quick Start Manual

What's in the box
Communication Hub Cord Grip
Power Adapter x2
1
Plug in and hook up the gateway
Hook up the Cat5e cable between the gateway and
1a
router
Plug the adapter into
1b
the gateway and a
standard outlet.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
293 Wright Street | Delavan, WI 53115 | Ph: 866-973-6835 | Orders Fax: 800.321.8793 | PENTAIR.COM/PENTEK
For a detailed list of where Pentair trademarks are registered, please visit www.pentair.com/en/registrations.html. Pentair trademarks and logos are owned by Pentair or its affiliates. Third party registered and unregistered trademarks and logos are the property of their respective owners.
Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice. Pentair is an equal opportunity employer.
PN1014 (Rev. 06/26/20) © 2020 Pentair Ltd. All Rights Reserved.
2
Remove cover from the drive
2a
Gateway
Shut off the power to the
drive. [Wait 5 minutes to allow
capacitors to de-energize.]
2b
Cat5e Cable
Separate cover and back plate.
3
Connect Pentek communication hub to the drive
3a
Locate the P and N terminals in the I/O Connection area.
3b
Install the cord grip in the
bottom of the drive. Remove a
knock out if necessary. Pass the
cable through the cord grip.
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures: Reorient or relocate the receiving
Before beginning any installation, review Pentair Pentek Intellidrive® Installation and Operations Manual
4
Replace the drive cover and restore power to the drive
2c
4a
Verify there is a gap Hook the cover onto the backplate,
lower it into place, and then push
between cover and back
the cover back to close the gap.
plate.
2d
4b
Pull out bottom of cover
Plug the adapter into the
and remove.
Pentek communication hub.
5
Online Device Registration
5a
5b
3c
5c
Connect the Red wire
to the P terminal and
the Black wire to the
5d
N terminal.
antenna. Increase the separation between the equipment and receiver. Connect the equipment into
an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an
experienced radio/TV technician for help.
Quick Start Guide
for complete instructions and warnings.
4c
Plug the adapter into a
standard outlet.
4d
When the LED on the
communication hub turns
solid green, installation is
complete.
Download the Pentair Home App to your mobile device from Apple
App Store® or Google Play®.
Open the App.
1. Existing users: Login to your account, click DEVICES and then
ADD NEW DEVICE.
2. New users: Scroll down in the app and click SIGN UP AS A
CUSTOMER.
Follow prompts to enter device and system information. Complete
online device registration.
The VFD-LINK unique device ID code is required for this step and it
can be found on this page or on the cover of the device.
Device ID Label