Pentair IntelliTouch520366 Quick Start Manual page 11

Pentair Pool Products
2. Use the Up and Down buttons at the bottom of the screen to step through the
alphabetical list of programmed names.
3. When you find the names you want, press the Save button.
4. Press the Exit button to return to the Main screen.
To set a cool-down cycle for the heater
Getting There
MENU SETUP
Go to the Filter Delay screen.
1. Find the Master Spa/Pool label. Press
the button next to it to change the
setting to Yes.
2. When you are done, press the Save
button.
3. Press the Exit button to return to the
Main screen.
To set automatic spa heating when the
spa is manually turned on
Getting There
MENU SETUP
Go to the Manual Heat screen.
1. Find the Spa Manual Heat label. Press
the button next to it to change the
setting to Yes.
2. When you are done, press the Save
button.
3. Press the Exit button to return to the
Main screen.
Rev. B 3-19-04
EQUIPMENT FILTER DELAY
EQUIPMENT MANUAL HEAT
11
Quick Start Guide
P/N 520366