Table of Contents
Advertisement
1.800.561.8187
Introduction
Congratulations on your purchase of the Extech SD800 CO
This meter measures, displays, and stores CO
stored on a SD card for transfer to a PC. This meter is shipped fully tested and calibrated and, with
proper use, will provide years of reliable service
Features
LCD simultaneously displays Carbon Dioxide, Temperature and Relative Humidity
Datalogger date/time stamps and stores readings on an SD card in Excel® format for easy
transfer to a PC
Selectable data sampling rate: 5, 10, 30, 60, 120, 300, 600 seconds
Product Description
1.
Humidity/Temperature Sensor
2.
Humidity Display
3.
Temperature Display
4.
CO2 Display
5.
LOG (ENTER) button
6.
SET button
7.
AC adaptor socket
8.
CO2 probe socket
9.
10.
11. Reset button
12. RS-232 output
13. SD memory card socket
14. CO
probe
2
15. CO
plug
2
Note: Battery Compartment and Tilt Stand are located on the back of the meter.
www.
/Temperature/Humidity Datalogger.
2
, temperature and relative humidity readings. Data is
2
SD800-en-GB_v2.9 8/18
2
information@itm.com
.com
Advertisement
Table of Contents
Need help?
Do you have a question about the SD800 and is the answer not in the manual?
Questions and answers
Is it possible to use the dtalogger without connecting the 9V inDC?
Yes, the Extech Instruments SD800 data logger can be used without the 9V DC power supply, but six AAA batteries must be installed. Without the batteries, the real-time clock will reset each time the AC adaptor is disconnected.
This answer is automatically generated