Zamel Cet Ledix SLR-01 Manual

Monochrome LED controller
SLR-01
Mounting in a Ø60 Mounting
junction box indoor only
SLR-01 controller is designed for cooperation with light sources equipped with LED diodes
and supplied with 10 ÷ 14 V DC. In connection with standard monochrome LEDIX fittings
and with other LED diode products in cooperation with transmitters of EXTA FREE wireless
control system the SLR-01 controller allows a function with switching on/switching off with-
out necessity to lay the cabling for the switches. In addition a brightening/dimming is pos-
sible for LED lighting connected with SLR-01.
Characteristic features:
• the controller is designed to carry out simple functions connected with lighting control
such as: switching on/ switching off, bistable mode, time mode, brightening/dimming.
• possibility for wireless control system (EXTA FREE transmitters) or wired control system
(normally open contact),
• one transistor output (MOSFET) with maximum current capacity of 4 A,
• wide operation range (up to 230 m in the open area),
• small dimensions (easy mounting in a Ø60 junction box),
• low power consumption in the standby mode – controller is designed for continuous op-
eration .
PL 43-200 Pszczyna, ul. Zielona 27, Poland
tel: +48 32 449 15 00, fax: +48 32 449 15 02
10÷14 V DC / 0,22 W; IP20
weight: 25 g
CET Lighting Sp. z o.o. declares that
the equipment complies with the principal
requirements and other applicable rules
of the RTTE Directive.
The symbol means selective
collecting of electrical and electronic
equipment. It is forbidden to put
the used equipment together with
other waste.
Declaration of Conformity is on www.ledix.pl
SCAN
the technical
data
Co-operation
with EXTA FREE
transmitters
Cet Lighting Sp. z o.o.
e-mail: ledix@ledix.pl, www.ledix.pl
Monochrome LED controller
TYPE: SLR-01
SLR-01 ENG Ver. 01
Monochrome LED
controller
SLR-01
10 ÷ 14 V DC