Tower To Rack Conversion - Compaq ProLiant ML350 G2 Series Service Overview

Compaq ProLiant ML350 G2 Service Overview

Tower to Rack Conversion

System configuration switch 3 must be set to indicate whether the server is being deployed as a
tower or a rack. If the switch is off, the server is configured as a tower. If it is on, the server is
configured as a rack.
Table 9: System Models
Rev. 1.0
Switch Default
1 Off
2 Off
3 Off
4 Off
5 Off
6 Off
7 Off
8 Off
Function
Off = Video enabled
On = Video disabled
Off = Normal operation
On = Configuration locked
Off = Tower
On = Rack
Off = Normal
On = Enable diskette boot
Off = Normal
On = Password disable
Off = Normal
On = Configuration erased
Reserved
Reserved
22
Page 22 of 24