Table of Contents
Advertisement
7. Press the METAR MAP
softkey
to
display
selected report location (in
this case KCAV) centered on
the Graphical METAR dis-
play as shown in Figure 44.
NOTE: The METAR MAP
softkey is only available
when viewing METARs and
valid data for graphical
METARs is being received.
Finding User Defined
Areas by Name or City
When the identifier of the
desired location is known, the
method previously described
can be used to select it.
However, if the identifier is
not known, the name of the
location can be entered. The
system will also allow entry of
just the first few characters of
the location name to help find
it in the database. If neither
the identifier nor the location
name is known, the city/state
can be scanned.
To Enter Location Name:
The following example shows
entering EAGLE GROVE
MUN as a location.
1. Turn the outer Control
Knob one click clockwise.
Figure 45 will be displayed.
2. Continue to turn the outer
knob clockwise to highlight
the N as shown in Figure 46.
Revision 2 Nov/2002
the
37
Normal Operation
Figure 44
Figure 45
Figure 46
KMD 550/850 FIS Addendum
Advertisement
Table of Contents
