Kenwood TK-5210 Service Manual page 10

9. Firmware Version Information
(K2 and K3 models only)
Press and hold the [Side3] key while turning the transceiver
power ON and then keep pressing and holding the [Side3] key,
the firmware version information appears on the LCD.
10. Clock Adjustment Mode
(K2 and K3 models only)
10-1. Flow chart of operation
[Orange] + [PTT] + Power ON
[Side2] and [Side3] keys or [C] and [D] keys
YEAR
[A]
MONTH [Side2] and [Side3] keys or [C] and [D] keys
[A]
DAY [Side2] and [Side3] keys or [C] and [D] keys
[A]
HOUR [Side2] and [Side3] keys or [C] and [D] keys
[A]
MINUTE [Side2] and [Side3] keys or [C] and [D] keys
[A]
Completion
11. Transceiver Information Mode
(K2 and K3 models only)
Use this function to confirm the transceiver firmware version.
1. Press and hold the [Side1] and [PTT] keys while turning
the transceiver power ON and then release the [PTT] key
first.
2. The transceiver firmware version appears on the LCD.
3. To exit the transceiver information mode, turn the trans-
ceiver power OFF.
REALIGNMENT
Release [Orange]
TK-5210
9