Monitor Features; Features - HP V28 4K Maintenance And Service Manual

2

Monitor features

This chapter provides an overview of the monitor's features.

Features

The monitor includes the following features:
●
70.9 cm (27.9 in) diagonal viewable screen area with 3840 × 2160 resolution, plus full-screen support
for lower resolutions; includes custom scaling for maximum image size while preserving original aspect
ratio
●
Liquid crystal display (LCD) with active matrix
●
Nonglare panel with an WLED backlight
●
Wide viewing angle to allow viewing from a sitting or standing position, or moving from side to side
●
Tilt adjustment capability
● Removable stand for flexible monitor head mounting solutions
●
HP Quick Release 2 device to quickly attach the monitor head to the stand with a simple click, and then
remove it with the convenient sliding tab release
● DisplayPort™ video input (cable included with select products)
Two High-Definition Multimedia Interface™ (HDMI) video inputs (cable included with select products)
●
●
Audio-out (headphone) jack
Four on-screen display (OSD) buttons, three that you can reconfigure to quickly allow selection of the
●
most commonly used operations
●
Plug and Play capability if supported by your operating system
●
VESA® mounting bracket for attaching the monitor head to a wall-mount device or swing arm
●
Support for a mounting bracket to attach the monitor to a workstation
●
On-screen display (OSD) adjustments in several languages for setup and screen optimization
● Support for FreeSync™, an Adaptive-Sync technology, to reduce stuttering and tearing in games and
videos by locking the monitor's refresh rate to the frame rate of a compatible graphics card
NOTE: Adaptive refresh rates vary by display.
●
Energy saver feature to meet requirements for reduced power consumption
NOTE: For safety and regulatory information, see the Product Notices provided in your documentation kit. To
access the latest user guide, go to http://www.hp.com/support, and follow the instructions to find your product.
Then select User Guides.
3