Dp Connector Cn5301; Audio Connector Cn603 - HP V28 4K Maintenance And Service Manual

DP connector CN5301

Repair the DP connector:
1) Use a soldering iron and a desoldering pump to remove as much solder as possible from the
pin.
2) Use a hot air gun to melt the solder on the pins.
3) Lift the CN5301 connector from the PCB.
4) Place the new component on the PCB. Be sure that it matches the PCB footprint.
5) Solder the new component.

Audio connector CN603

Repair the audio connector:
1) Use a hot air gun to melt the solder on the pins. Pin solder with soldering iron and absorber.
You can gently push down with the soldering iron once everything is molten to move the M1
out of the through holes.
2) Lift the CN603 connector from the PCB.
3) Place the new component on the PCB. Be sure that it matches the PCB footprint.
19