HP V28 4K Maintenance And Service Manual page 24

displayed. enabled.
"Power Button
The monitor's Power Button Lockout feature
Lockout" is displayed.
is enabled.
FreeSync is enabled Variable refresh rate (VRR) m ght be
in monitor OSD, but disabled in the graphics card software.
refresh rate does not
vary.
The refresh rate might be set too low.
The monitor is off
but it did not seem
to enter into sleep
mode.
The monitor is off Content and/or hardware might not
but it did not seem
be VRR capable.
to enter into sleep
mode.
The monitor is FreeSync might not be enabled.
experiencing
screen tearing.
sec to disable the OSD Lockout function.
Press and hold the Power button for 10
sec to unlock the power button function.
Enable VRR in your graphics card
software.
In Windows, set the refresh rate to its
maximum setting.
Verify the content being displayed is VRR
capable.
Be sure a computer with an AMD Radeon
graphics card or a AMD A-Series
processor is connected to the monitor
using a
DisplayPort or HDMI cable.
Open the OSD and enable FreeSync.
21