Casio V-R100 Service Manual page 26

K. E840-1 PCB / DALLAS KEY
E840-1 PCB
Screw (S9)
FPC
Screw (S9)
Tighten with ground wire.
K-1. E840-1 PCB
1. Detach five connectors.
2. Undo four screws.
3. Release the locks of the connector and disconnect one FPC.
4. Remove E840-1 PCB.
K-2. DALLAS KEY
Ferrite core
2 turn
50 mm
Connectors
Screw (S9)
Tighten with ground wire.
– 23 –
Screw (S9)
Fixing two ground wires
Tape
V-R100