Additional Functions - Volvo ECS Training Tips And Tactics

ECS Gen. 2
Additional
Nine additional functions can be programmed into the ECS
functions
ECU using VCADSPro.
Of the nine functions, the customer can choose one or two
of functions 1 - 8 + function 11.
The table above shows permitted combinations and the
required switches:
1x2P = One x 2 position switch
2x2P = Two x 2 position switch
1x3P = One by 3 position switch
- = Combination not permitted
= Function not requested if other function is
requested or active
165