Table of Contents
Advertisement
PROBLEM
No Green Light
Red Light Flashing
No Air Flow
Poor Vapor Density or Volume
High Test Pressure Reading
TROUBLESHOOTING / MAINTENANCE
SOLUTION
• Ensure power cord is properly installed on a fully
charged 12V DC Battery
• Open circuit / internal component
Contact Redline Detection Technical Support
• Open the flow control valve
• Check hoses are not kinked
• Insufficient Vapor Producing Fluid: Refill
• Flow Control Valve is partially closed
• Vapor Output Hose is kinked
• Vapor Output Hose is kinked
11
Advertisement
Table of Contents
