Optional Accessories - Redline Speed Smoke Operation Manual

OPTIONAL ACCESSORIES

1. Easy EVAP [PN 95-0030]
™
This universal Fuel Filler Neck Connector system fits 100% of
vehicles to simplify EVAP testing
2. Replacement Sealing Disks
2a. [ PN 96-0017-12 ] 2b. [ PN 96-0017-20 ] 2c. [ PN 96-0017-40 ]
Replacement Sealing Discs for Easy EVAP
3. Standard Cone Adaptor [ 96-0004 ]
For use to seal openings from 1 in. (2.5 cm) to 3.4 in. (8.6 cm) to
introduce vapor into exhaust and induction systems
4. Extended Accessory Kit [ 95-0005 ]
Standard Cone Adaptor for dual exhaust for use to seal openings
between 1 in. (2.5 cm) to 3 in. (7.6 cm). Vapor Output Hose
extension allows operator to test 20 ft. (6.1 m) from unit. Additional
OEM-Approved vapor producing fluid for 500+ typical tests
5. XL Cone Adaptor [PN 96-0055]
For use to seal openings from 3.4 in. (8.6 cm) to 5.25 in. (13.3 cm) to
introduce vapor into exhaust and induction systems
6. Cooling System Adaptor [ 96-0086 ]
To test cooling system or coolant reservoir, attach to radiator
7. SmokeMeister Wand [96-0088 ]
™
Tube delivers vapor to find wind and water leaks in cabin or trunk
8. Wand / Tip Adaptor [ 15-0080 ]
Install into SmokeMeister
9. PowerSmoke Adaptor 1.5 in (3.8 cm) [95-0080]
Inflatable block off bladder with a pressurized vapor pass-through
10. Power Intake Adaptor 3.9 in (9.9 cm) [95-0083]
Inflatable block off bladder with a pressurized vapor pass-through
11. Power Intake Adaptor 2.9 in. (7.4 cm) Diameter [ 95-0081 ]
™
Inflatable block off bladder with a pressurized vapor pass-through
12
wand for pinpoint vapor stream
™
1
2a 2b
3
4
5
6
7
8
9
10
11
2c