Optex IVPC-DS Quick Start Manual

How to Manually Update the IVPC-DS Firmware

Caution

Do not turn off the power during the update. IVPC-DS may become inoperable.

Note

Please make sure the IVPC-DS is paired to the IVPC-MS or smartphone.

(not in the white/blue pairing mode).

You may not be able to update if the battery level is low. Charge the battery before updating.

1. Turn off the IVPC-DS and remove the microSD card.

1-1. Loosen the lock screw

1-3. Remove the front cover

1) Remove the

rubber bushing

1-5. Remove the microSD card

2) Remove the microSD card

2. Extract the files from the DS zip file to the microSD card as shown below

If you are not using the microSD card included with the IVPC-DS, use any UHS -1 (4 to 32 GB)

microSD card.

2) Pry and lift up

1) Open the rubber flap

1-2. Remove from the mounting plate

1) Slide the

main unit

1-4. Power OFF

1) Push the power on/off button

2) Pull off the main unit

Table of Contents

Do you have a question about the IVPC-DS and is the answer not in the manual?

Page 1 2) Remove the microSD card 2. Extract the files from the DS zip file to the microSD card as shown below If you are not using the microSD card included with the IVPC-DS, use any UHS -1 (4 to 32 GB) microSD card.
Page 2 3. Insert the microSD card back into the IVPC-DS. 2) Secure the rubber flap 1) Insert the microSD card 4. When the power is turned on, the update starts automatically. Solid light Blue: Firmware Update in progress Solid light White: Firmware Update complete Push the power on/off button...