Advertisement
Wall Mount Installation -
H(M)(T)
Below is a general, sample procedure using a wall mount bracket with the FD8169A
camera:
1. Locate the position where you want to install the wall mount bracket and camera. Drill
holes on the wall for securing the bracket and for routing cables.
2. You can route cables through the hole in the center of the bracket and the space
beneath the camera.
3. Secure the wall mount bracket to the wall using the included plastic anchors and
screws.
Aligned with D holes
5
4. Route cables through the crescent cutout on the side of camera.
5. Secure the camera to the bracket using 3 M4X10 screws.
6. Connect cables and you may now begin the initial connection and configuration.
FD8167A, FD8169A, FD8177-H, FD8179-H, FD9189-
4
9
Advertisement
