Advertisement
Revision History:
* Rev. 1.0: Initial Release
hole is added.
I
Compatible VIVOTEK Cameras
FD8167A, FD8169A, FD8177-H, FD8179-H, FD9171-HT, FD9181-HT, FD9165-HT, FD9167-H(T),
FD8177-HT, FD9187-H(T)V, FD9189-H(M)(T), FD8367A, FD8369A, FD8377-HV, FD8379-HV,
FD9371-(E)HTV, FD9381-(E)HTV, FD9365-(E)HTV, FD9365-HTVL, FD9367-(E)H(T)V, FD8377-(E)
HTV, FD9391-EHTV, FD9387-(E)H(T)V, FD9389-(E)H(M)(T)V, FD9360-H, IT9360-H, FD9368-HTV,
FD9380-H, IT9380-H, FD9388-HTV, IT9388-HT
You may also refer to VIVOTEK's website for the list of supported models. Support for other models can
be available through time.
Installation
II
Mounting Hole Definitions
Above are the locations of different groups of mounting holes for matching different
cameras:
Hole Type
Applicable Cameras
FD9371-(E)HTV, FD9381-(E)HTV, FD9365-(E)
A
HTV, FD9365-HTVL, FD9367-(E)H(T)V, FD8377-
(E)HTV, FD9391-EHTV, FD9387-(E)H(T)V
FD9171-HT, FD9181-HT, FD9165-HT, FD9167-
B
H(T), FD8177-HT, FD9187-H(T)V
FD8367A, FD8369A, FD8377-HV, FD8379-HV,
C
FD9389-(E)H(M)(T)V, FD9368-HTV, FD9388-HTV
FD8167A, FD8169A, FD8177-H, FD8179-H,
D
FD9189-H(M)(T)
* Rev. 1.1: Added supported models and one more routing
NOTE: You may need tools like hammer,
chisel, or a flat-bade screwdriver to remove
the knock-out tab on the secondary routing
hole.
2
Screw
No. of screws
M4X10
3
Advertisement
