Advertisement
Wall Mount Installation -
FD9365-HTVL, FD9367-(E)H(T)V, FD8377-(E)HTV, FD9391-EHTV, FD9387-(E)H(T)V
Below is a general, sample procedure using a wall mount bracket:
1. Locate the position where you want to install the wall mount bracket and camera. Drill
holes on the wall for securing the bracket and for routing the cables.
2. Secure the bracket by hammering anchors into the wall and then fasten screws through
the four mounting holes on the bracket.
3. Route power lines and other cables through the wall and the bracket.
4. Remove the waterproof connectors from the camera.
5. Align the camera's mounting holes with the A holes. Secure the camera to the wall
mount bracket as shown below.
IMPORTANT!
The screws and mounting surface must be able to support a weight of 4 kg.
FD9371-(E)HTV, FD9381-(E)HTV, FD9365-(E)HTV,
Aligned with A holes
4
Advertisement
