Advertisement

Quick Links

User's manual
Classic Brew
European edition.
Re-ordering No: xxxxxxx
Version No: x

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Classic Brew and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Scanomat Classic Brew

  • Page 1 User’s manual Classic Brew European edition. Re-ordering No: xxxxxxx Version No: x...
  • Page 3 We are pleased that you have chosen a Scanomat Coffee Brewer. Should you have any questions regarding the coffee brewer and the operation of it please do not hesitate to contact us. We are convinced that you will be pleased with your choice! Vibe Allé...
  • Page 5 Important Warning: Please be aware of the danger of scalding (in the dispensing area) when dispensing the various hot drinks. Warning: Before cleaning, servicing etc. that require the opening of the front door, the switch situated in the delivery area must be switched off. The brewer has been switched off when the display light turns off and the blower stops.
  • Page 7: Table Of Contents

    Contents Operation of the SCANOMAT Coffee Brewer................1 Technical Specifications: ......................2 General Drawing ........................3 Installation ..........................4 Water Connection ........................5 Electrical connection ......................6 Start up........................... 6 How to drain the machine...................... 6 Change of Strength........................7 Change of Volume per Cup......................
  • Page 8: Operation Of The Scanomat Coffee Brewer

    Users manual Classic Brew Operation of the SCANOMAT Coffee Brewer The Scanomat coffee and coffee speciality brewers are high technology brewers which by means of a micro processor controlled brew process dispense various first class quality coffee drinks. Water is heated in the thermostatically controlled hot water tank with automatic water inlet. The water tank has built-in over heaters and an overflow leading to the drip tray.
  • Page 9: Technical Specifications

    Water temperature: 4,5 - 38,0 ° C Environment: Temperature: 10 - 38 ° C, humidity max. 90%RH. Shelves/transportation: Temperature: min. 0° C Scanomat A/S Vibe Allé 3. Postboks 131 DK-2980 Kokkedal (Copenhagen) Reg.nr.236.990 Tel: (+45) 49 18 18 00. Fax: (+45) 49 18 01 18...
  • Page 10: General Drawing

    T Heater switch for- thermo tank U Light diodes W Door lock X Key for door lock Scanomat A/S Vibe Allé 3. Postboks 131 DK-2980 Kokkedal (Copenhagen) Reg.nr. 236.990 Tel: (+45) 49 18 18 00. Fax: (+45) 49 18 01 18...
  • Page 11: Installation

    Users manual Classic Brew Installation Service and repair is only to be carried out by service engineers educated by Scanomat. The coffee brewer is to be secured additionally in accordance with local regulations. The coffee brewer must be earth connected (green conductor).
  • Page 12: Water Connection

    (1/2" external screw thread G+F). Before connecting the brewer draw off some buckets of water to clean the pipes. If the water quality is not top-quality we recommend that a Scanomat water filter is mounted. Fasten the hose nipple (C) with screws to the connecting nipple (B) (available in angle and straight version).
  • Page 13: Electrical Connection

    4. Drain the water tank by removing the drain hose plug. The drain hose is located in the bottom center of the water tank. Scanomat A/S Vibe Allé 3. Postboks 131 DK-2980 Kokkedal (Copenhagen) Reg.nr.236.990 Tel: (+45) 49 18 18 00. Fax: (+45) 49 18 01 18...
  • Page 14: Change Of Strength

    If you wish to fill the left tank fully in the period from 6:00 to 9:00, you have to programme a timer with start time 6:00 and stop time 9:00 in function 2. Scanomat A/S Vibe Allé 3. Postboks 131 DK-2980 Kokkedal (Copenhagen) Reg.nr. 236.990 Tel: (+45) 49 18 18 00. Fax: (+45) 49 18 01 18...
  • Page 15: Watch And Timer Programming

    After pressing the end time for this programmable timer with the minutes flashing will be on the display: Scanomat A/S Vibe Allé 3. Postboks 131 DK-2980 Kokkedal (Copenhagen) Reg.nr.236.990 Tel: (+45) 49 18 18 00. Fax: (+45) 49 18 01 18...
  • Page 16 The coffee brewer can be set to run with 24 hour format or 12 hour format (Am/Pm). When all 5 programmable timers have been adjusted as described above, the display will show: Scanomat A/S Vibe Allé 3. Postboks 131 DK-2980 Kokkedal (Copenhagen) Reg.nr. 236.990 Tel: (+45) 49 18 18 00. Fax: (+45) 49 18 01 18...
  • Page 17: Keyboard Functions

    Pressing this key will start the machine brewing 0.75 gallon of coffee into the thermo tank. TIMER Pressing this key, the display will show time setting. Scanomat A/S Vibe Allé 3. Postboks 131 DK-2980 Kokkedal (Copenhagen) Reg.nr.236.990 Tel: (+45) 49 18 18 00. Fax: (+45) 49 18 01 18...
  • Page 18: Special Functions

    Setting up the FILL system: The classic brew is equipped with a system to automatically monitor the contents of the product bins to avoid brewing with out products present. The function of the system is that whenever a product bin is lower than 12.5% of its maximum content, an audible and visible alarm will be given upon every...
  • Page 19: Operation Codes

    If the tank is not filled up, a water tap will show on the display. Next “vend” will fill the water tank. End: Press “service switch” inside door. Scanomat A/S Vibe Allé 3. Postboks 131 DK-2980 Kokkedal (Copenhagen) Reg.nr.236.990 Tel: (+45) 49 18 18 00. Fax: (+45) 49 18 01 18...
  • Page 20: Maintenance

    Press the Service Switch (I) on the inside of the door, -the display will show "SERVIC". Press "CLEAN". Scanomat A/S Vibe Allé 3. Postboks 131 DK-2980 Kokkedal (Copenhagen) Reg.nr. 236.990 Tel: (+45) 49 18 18 00. Fax: (+45) 49 18 01 18...
  • Page 21: Preventive Maintenance

    Note! We recommend that water is drawn off the machine and replaced by fresh water after holidays or weekends when the brewer has not been in operation for some time. Scanomat A/S Vibe Allé 3. Postboks 131 DK-2980 Kokkedal (Copenhagen) Reg.nr.236.990 Tel: (+45) 49 18 18 00. Fax: (+45) 49 18 01 18...
  • Page 22: Trouble Shooting

    Automatic brew mode do not Check if waste tray is full,- is the sense chains touching work. the waste water. Scanomat A/S Vibe Allé 3. Postboks 131 DK-2980 Kokkedal (Copenhagen) Reg.nr. 236.990 Tel: (+45) 49 18 18 00. Fax: (+45) 49 18 01 18...

Table of Contents