Dte Options; Bit Rate - ADTRAN ISU 128 User Manual

Chapter 6. Configuration

DTE OPTIONS

The following procedure configures the DTE options for asynchronous and
synchronous applications. Figure 6-15 and Figure 6-16 illustrate the menu
trees for both asynchronous and synchronous operation.
Ensure your DTE equipment is set for asynchronous operation before attempting to
make an asynchronous call. Failure to do so will cause the call attempt to fail.
1=Netw. options
2=DTE options
3=CONFIG
3=Protocol
4=Quick setup
5=Remote config
3=CONFIG

Bit Rate

The Bit Rate can be set asynchronously for 300, 1200, 2400, 4800, 9600, 19200,
38400, 57600, and 115200 bps.
The Bit Rate can be set synchronously for 2400, 4800, 9600, 19200, 38400, 48000,
56000, 64000, 112000, and 128000 bps.
42
1=Asynchronous
2=Synchronous
1=Netw. options
1=Asynchronous
2=DTE options
2=Synchronous
3=Protocol
4=Quick setup
5=Remote config
ISU 128 User Manual
1=Bit Rate
2=Connector Type
3=RTS Options
4=CTS Options
5=CD Options
6=DTR Options
7=DSR Options
8=Flow Control
9=Data Format
Asynchronous DTE Options Menu Tree
1=Bit Rate
2=Connector Type
3=RTS Options
4=CTS Options
5=CD Options
6=DTR Options
7=DSR Options
8=Transmit Clock
Synchronous DTE Options Menu Tree
Figure 6-15
Figure 6-16
61202.029L2-1