Table of Contents
Advertisement
Rear Window Washer Operation
Pushing the windshield wiper lever forward
activates the rear window washer. If the lever is
pushed while on the intermittent setting, the
wipers will turn on and operate for several wipe
cycles after the lever is released, and then
resume the intermittent interval previously
selected. If the lever is pushed while the wipers
are in the off position, the wipers will operate
several wipe cycles, then turn off.
CLIMATE CONTROLS
A
C
C
UTOMATIC
LIMATE
ONTROL
D
A
F
ESCRIPTIONS
ND
UNCTIONS
Uconnect 4 With 7–inch Display Automatic
Temperature Controls
Uconnect 5 With 10.1-inch Display Automatic
Temperature Controls
Max A/C Button
Press and release the MAX A/C button
on the touchscreen to change the
current setting to the coldest output
of air. The MAX A/C indicator
illuminates when MAX A/C is on. Pressing the
button again will cause the MAX A/C operation
to exit.
NOTE:
The MAX A/C setting is only available on the
touchscreen.
GETTING TO KNOW YOUR VEHICLE
A/C Button
Press and release the button on the
touchscreen, or push the button on
the faceplate to change the current
setting. The indicator illuminates
when A/C is on.
NOTE:
If the system is in Mix or Defrost Mode, the
A/C can be turned off, but the A/C system
shall remain active to prevent fogging of the
windows.
If not operating in AUTO mode, the system
will not automatically sense the presence of
fog, mist or ice on the windshield. Defrost
Mode must be manually selected to clear the
windshield and side glass.
If fog or mist appears on the windshield or
side glass, select Defrost Mode and adjust
blower speed if needed.
75
2
Advertisement
Table of Contents
