Table of Contents
Advertisement
110
GETTING TO KNOW YOUR VEHICLE
WARNING! (Continued)
Guard against carbon monoxide with proper
maintenance. Have the exhaust system
inspected every time the vehicle is raised. Have
any abnormal conditions repaired promptly.
2. Unclip the vacuum nozzle and pull to extend
vacuum hose from the storage location.
NOTE:
The hose can reach every corner of the vehicle
floor.
3. Install desired attachment if needed.
Front Storage Compartments
1 — Vacuum Nozzle Storage Location
2 — Attachment Compartment
NOTE:
To access crevice or upholstery attachments,
open the front Attachment Compartment.
Crevice Tool — Able to reach into tight
spaces including the seat latches located
in the floor.
Upholstery Tool — Use to agitate dirt and
debris from carpets and seats. This tool
can also be used to pick up pet hair.
Hose Extension — Use to add another
12 ft (3.6 m) of usable length to the
vacuum hose. Hose extension is provided
in a bag attached to a grocery hook
behind the third row seat on the driver's
side.
4. Push the vacuum on/off button
under the vacuum nozzle storage location.
Use vacuum as needed.
NOTE:
When the vacuum is ON, the LED indi-
cator on the on/off button will illuminate.
When the vacuum is OFF, the LED indi-
cator will also be off.
After nine minutes of operation in ACC
mode (engine not running), the Low
Power Indicator Light (LOW PWR) will illu-
minate.
located
Power Buttons
1 — Low Power Indicator Light
2 — On/Off Button
Advertisement
Table of Contents
