Honda CRF250R Owner's Manual page 93

Suspension
8. Remove the front axle nut (10) and loosen the
axle pinch bolts (11) on both forks.
Pull the front axle shaft (12) out of the wheel
hub and remove the front wheel with collars.
(10) (12)
(11)
(10) front axle nut (12) front axle shaft
(11) axle pinch bolts
9. Remove the brake hose clamp bolts (13), stay
A (14) and stay B (15) from the left fork.
10. Remove the front brake caliper mounting bolts
(16) and brake caliper (17) from the left fork.
• Do not support the brake caliper by the brake
hose.
• Do not operate the brake lever after the front
wheel is removed. To do so will cause
difficulty in fitting the brake disc between
the brake pads.
90
Servicing Your Honda
Left fork:
(15)
(14) (13)
(13) brake hose clamp bolts
(14) stay A
(11)
(15) stay B
(16) front brake caliper mounting bolts
(17) brake caliper
11. Loosen the fork bridge lower pinch bolts (18),
when loosening the lower bolts make sure to
hold the fork tube so it dose not fall.
12. Pull the fork legs down and out.
(18)
(18) fork bridge lower pinch bolts
13. Clean the fork assembly, especially the sliding
(16)
14. Measure the length (21) between the axle
(17)
(19) sliding surface
(20) fork dust seal
surface (19) of the slider and fork dust seal
(20).
holder and outer tube and record it before
disassembling the fork.
(20) (19)
(21)
(21) length