Honda CRF250R Owner's Manual page 44

Fuel Pressure Relieving
1. Hang the fuel tank to the left side of the frame
(page 35).
2. Release the fuel pump connector A (1) from
the stay (2) and disconnect it.
(2)
(1)
(1) fuel pump connector A (2) stay
3. Reposition the fuel tank and start the engine
and let it idle until the engine stalls.
Fuel Line Replacement
Disconnection
1. Relieve the fuel pressure (this page).
2. Hang the fuel tank to the left side of the frame.
3. Remove the fuel quick connect fitting cover
(1) from the fuel pump (2).
4. Check the fuel quick connect fitting (3) for
dirt, and clean if necessary.
5. Remove the bolt (4), clamp and setting rubber
(5).
Fuel pump side: Injector side:
(1) (3)
(3) (2)
(1) fuel quick connect fitting cover
(2) fuel pump
(3) fuel quick connect fitting
(4) bolt
(5) clamp and setting rubber
6. Place a shop towel (6) over the fuel quick
connect fitting.
Fuel pump side:
(5)
(6) shop towel
(4)
Fuel System
Injector side:
(6)
(cont'd)
41
Servicing Your Honda