Advertisement
AXIS 282/282A Installation Guide
Bare Board Video Server
This installation guide is applicable for the following Axis Video Servers:
•AXIS 282: 1-port bare board video server
•AXIS 282A: 1-port bare board video server
including 2-way audio
For a complete description, get the AXIS 282/282A Bare Board Video
Server User's Manual online from Axis Web site, www.axis.com
The AXIS 282/282A is a small form factor video server board designed to
be built into domes, fixed view cameras, PTZs, analog devices, etc., and is
fully featured for security surveillance and remote monitoring needs. The
AXIS 282 is based on the AXIS ETRAX 100LX network optimized system-
on-a-chip (SOC), and the AXIS ARTPEC-2 compression chip.
The AXIS 282/282A is equipped with RS-232 or RS-485 ports for
connecting third party PTZ systems. It also has 1 alarm input and 1 alarm
output, which can be used to connect various third party devices, for
example door sensors and alarm bells.
The AXIS 282A has a Line/Mic In (mono), via the internal connector I/O
pins, for connecting an external microphone or other source producing a
line level signal. An active speaker with a built-in amplifier can be
connected to Line Out (mono) to enable two-way communication. Audio
communication can be bi-directional (full-duplex), push to talk (half-
duplex) or in one direction only (simplex).
AXIS 282/282A
Installation Guide
Page 1
Advertisement
