Dnp3 Implementation Table - ABB Relion 615 Series Point List Manual

1MRS756879 D
DNP3 device profile document
○ Configurable
○ Only certain objects
○ Sometimes (attach explanation)
○ ENABLE/DISABLE UNSOLICITED
function codes supported
Default counter object/variation:
● No counters reported
○ Configurable
○ Default object
Default variation:
○ Point-by-point list attached
Sends multi-fragment responses:
● Yes
○ No
○ Configurable
Sequential file transfer support:
Append file mode
Custom status code strings
Permissions field
File events assigned to class
File events send immediately
Multiple blocks in a fragment
Max number of files open
● = Selected,○ = Not selected
3.2
RED615
Point List Manual

DNP3 implementation table

The following table identifies which object variations, function codes and
qualifiers the IED supports in both request messages and response messages. For
static (non-change-event) objects, requests sent with qualifiers 00, 01, 06, 07 or 08
are responded with qualifiers 00 or 01. Requests sent with qualifiers 17 or 28 are
responded with qualifiers 17 or 28. For change-event objects, qualifiers 17 or 28
are always responded.
DNP3 protocol implementation
○ When device restarts
○ When status flags change
No other options are permitted.
Counters roll over at:
● No counters reported
○ Configurable (attach explanation)
○ 16 bits
○ 32 bits
○ Other value: _______
○ Point-by-point list attached
○ Yes ●
○ Yes ●
○ Yes ●
○ Yes ●
○ Yes ●
○ Yes ●
0
Section 3
No
No
No
No
No
No
41